A Comprehensive Review of Hydraulic Systems in Aerospace and Construction Engineering
Abstract
This paper provides a thorough examination of hydraulic systems used in construction and aerospace, emphasizing new developments and their vital functions in contemporary engineering. In the aircraft industry, where dependability at high altitudes is critical, hydraulic systems are essential for precise control over landing gear, flying surfaces, and brake systems. Fly-by-wire technology and advancements in lightweight materials, such carbon fiber-reinforced plastics, have greatly improved system efficiency and decreased mechanical complexity, satisfying the exacting aerospace standards for accuracy, weight efficiency, and dependability. Hydraulic systems provide the force required for heavy lifting and earthmoving operations in a variety of settings, powering vital pieces of equipment such as excavators, cranes, and loaders in the construction industry. Performance, fuel economy, and safety have all increased as a result of recent developments, such as digital automation and energy-efficient designs. For instance, more automation and accuracy are now possible with electro-hydraulic controls, which lowers human effort and increases productivity on construction sites. Each sector's unique problems are also covered in this analysis, such as fluid dependability in harsh environments, system complexity, thermal management, and environmental issues including energy efficiency and fluid leakage. Future trends are examined in the assessment's conclusion, with a focus on sustainable practices such energy-efficient designs and biodegradable hydraulic fluids. By focusing on these fields and developments, this research shows how hydraulic systems continue to propel industrial development, adjusting to intricate needs and advancing engineering applications' technical capabilities.
Keywords
Full Text:
PDFReferences
R. S. Gupta, “Hydrology and hydraulic systems,” Waveland Press, , 2016, https://books.google.co.id/books/about/Hydrology_and_Hydraulic_Systems.html?id=ci1XvgAACAAJ&redir_esc=y.
Q. Zhang, X. Kong, B. Yu, K. Ba, Z. Jin, Y. Kang, “Review and development trend of digital hydraulic technology,” Applied Sciences, vol. 10, no. 2, p. 579, 2020, https://doi.org/10.3390/app10020579.
A. R. Behbahani, and K. J. Semega, “Control strategy for electro-mechanical actuators versus hydraulic actuation systems for aerospace applications,” SAE Technical Paper, 2010, https://doi.org/10.4271/2010-01-1747.
W. Burget, J. Weber, “Mobile systems-markets, industrial needs and technological trends,” 8th International Fluid Power Conference (IFK), vol. 2, pp. 23-54, 2012, https://gfpsweb.org/sites/default/files/external_pages/IFK_2012/Group1_files/1.0_Weber.pdf.
Sumit et al., “Energy saving implementation in hydraulic press using industrial Internet of Things (IIoT),” Electronics, vol. 11, no. 23, p. 4061, 2022, https://doi.org/10.3390/electronics11234061.
X. Zhou, and X. Lei, “Fault diagnosis method of the construction machinery hydraulic system based on artificial intelligence dynamic monitoring,” Mobile Information Systems, vol. 2021, no. 1, pp. 1-10, 2021, https://doi.org/10.1155/2021/1093960.
Z. Liu, J. Sun, D. Yue, X. Zuo, H. Gao, and K. Feng, “A review on integral evolution of electro-hydraulic actuation in three momentous domains: aerospace, engineering machinery, and robotics,” Fourth International Conference on Mechanical Engineering, Intelligent Manufacturing, and Automation Technology, vol. 13082, pp. 141-159, 2024, https://doi.org/10.1117/12.3026210.
R. Brandstetter, T. Deubel, R. Scheidl, B. Winkler, and K. Zeman, “Digital hydraulics and “Industrie 4.0”,” Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, vol. 231, no. 2, pp. 82-93, 2017, https://doi.org/10.1177/0959651816636734.
T. Lin, Q. Chen, H. Ren, W. Huang, Q. Chen, and S. Fu, “Review of boom potential energy regeneration technology for hydraulic construction machinery,” Renewable and Sustainable Energy Reviews, vol. 79, pp. 358-371, 2017, https://doi.org/10.1016/j.rser.2017.05.131.
W. A. Smith, N. Zhang, and W. Hu, “Hydraulically interconnected vehicle suspension: handling performance,” Vehicle System Dynamics, vol. 49, no. 1-2, pp. 87-106, 2011, https://doi.org/10.1080/00423111003596743.
Y. Tanaka, S. Sakama, and R. Suzuki, “Bubble elimination from working oil for environmentally friendly hydraulic system design,” International Journal of Automation Technology, vol. 6, no. 4, pp. 1-6, 2012, https://doi.org/10.20965/ijat.2012.p0488.
Z. Tkáč et al., “Research of biodegradable fluid impacts on operation of tractor hydraulic system,” Acta technologica agriculturae, vol. 20, no. 2, pp. 42-45, 2017, https://doi.org/10.1515/ata-2017-0008.
W. Durfee, Z. Sun, and J. V. D. Van, “Fluid power system dynamics,” Center for Compact and Efficient Fluid Power, 2009, https://oylair.com/wp-content/uploads/2021/03/resources-library-2-fluid-power-system-dynamics.pdf.
D. Li et al., “Investigation methods for analysis of transient phenomena concerning design and operation of hydraulic-machine systems—A review,” Renewable and Sustainable Energy Reviews, vol. 101, pp. 26-46, 2019, https://doi.org/10.1016/j.rser.2018.10.023.
P. Novak, V. Guinot, A. Jeffrey, and D. E. Reeve, “Hydraulic modelling: An introduction: Principles, methods and applications,” CRC Press, p. 616, 2010, https://doi.org/10.1201/9781315272498.
B. A. Gyamfi, F. F. Adedoyin, M. A. Bein, F. V. Bekun, D. Q. Agozie, “The anthropogenic consequences of energy consumption in E7 economies: juxtaposing roles of renewable, coal, nuclear, oil and gas energy: evidence from panel quantile method,” Journal of Cleaner Production, vol. 295, p. 126373, 2021, https://doi.org/10.1016/j.jclepro.2021.126373.
C. Majidi, “Soft‐matter engineering for soft robotics,” Advanced Materials Technologies, vol. 4, no. 2, p. 1800477, 2019, https://doi.org/10.1002/admt.201800477.
R. Maryanti, A. Hufad, S. Sunardi, and A. B. D. Nandiyanto, “Teaching on Pascal's Law: The use of experimental videos of hydraulic concepts from everyday products in the learning process for students with special needs and vocational school students,” Journal of Engineering Education Transformations, vol. 35, no. 2, pp. 96-101, 2022, https://dx.doi.org/10.16920/jeet/2022/v35is2/22119.
R. A. Anugrah, and P. Rachmawati, “February. Analysis of Hydraulic System on Portable Electrical Hydraulic Jack,” Proceedings of the 4th International Conference on Sustainable Innovation 2020–Technology, Engineering and Agriculture (ICoSITEA 2020), pp. 203-208, 2021, https://doi.org/10.2991/aer.k.210204.037.
Y. Rastogi, P. Shishodiya, S. K. Singh, S. Kumar, V. K. Saini, “A review on design of hydraulic disc brakes, calculations and design,” International Journal of Advance Research and Development, vol. 3, no. 5, pp. 17-23, 2018, https://www.ijarnd.com/manuscripts/v3i5/V3I5-1156.pdf.
T. H. Ho, and K. K. Ahn, “Modeling and simulation of hydrostatic transmission system with energy regeneration using hydraulic accumulator,” Journal of mechanical science and technology, vol. 24, pp. 1163-1175, 2010, https://doi.org/10.1007/s12206-010-0313-8.
M. Bertolin, and A. Vacca, “An energy efficient power-split hybrid transmission system to drive hydraulic implements in construction machines,” Journal of Dynamic Systems, Measurement, and Control, vol. 143, no. 10, p. 101005, 2021, https://doi.org/10.1115/1.4051035.
D. B. Jani et al., “An overview on aircraft hydraulic system,” International Journal of Innovative Research in Technology, vol. 6, no. 5, pp. 6-10, 2019, https://ijirt.org/publishedpaper/IJIRT157626_PAPER.pdf.
R. Rădoi, C. Dumitrescu, I. David, M. Blejan, Ș. Șefu, C. Ionescu, “Utility vehicle with hydraulic transmission and hybrid energy source,” Mining Machines, vol. 41, no. 1, pp. 1-10, 2023, https://doi.org/10.32056/KOMAG2023.1.1.
J. G. Venegas, R. S. Harris, and B. A. Simon, “A comprehensive equation for the pulmonary pressure-volume curve,” Journal of applied physiology, vol. 84, no. 1, pp. 389-395, 1998, https://doi.org/10.1152/jappl.1998.84.1.389.
I. Raouf, P. Kumar, Y. Cheon, M. Tanveer, S. H. Jo, and H. S. Kim, “Advances in Prognostics and Health Management for Aircraft Landing Gear—Progress, Challenges, and Future Possibilities,” International Journal of Precision Engineering and Manufacturing-Green Technology, pp. 1-20, 2024, https://doi.org/10.1007/s40684-024-00646-4.
F. Pfeiffer, and F. Borchsenius, “New hydraulic system modelling,” Journal of Vibration and Control, vol. 10, no. 10, pp. 1493-1515, 2004, https://doi.org/10.1177/1077546304042063.
W. Rodi, “Turbulence modeling and simulation in hydraulics: A historical review,” Journal of Hydraulic Engineering, vol. 143, no. 5, p. 03117001, 2017, https://doi.org/10.1061/(ASCE)HY.1943-7900.0001288.
P. Ranjan, N. P. Choudhry, “Design and finite element analysis of double-acting, double-ends hydraulic cylinder for industrial automation application,” International Research Journal of Modernization in Engineering Technology and Science, vol. 05, no. 12, pp. 1829-1836, 2023, https://www.irjmets.com/uploadedfiles/paper//issue_12_december_2023/47440/final/fin_irjmets1703130948.pdf.
Y. Yang, L. Ding, J. Xiao, G. Fang, and J. Li, “Current status and applications for hydraulic pump fault diagnosis: A review,” Sensors, vol. 22, no. 24, p. 9714, 2022, https://doi.org/10.3390/s22249714.
S. A. Faroughi, A. J. J. Pruvot, and J. McAndrew, “The rheological behavior of energized fluids and foams with application to hydraulic fracturing,” Journal of Petroleum Science and Engineering, vol. 163, p. 243-263, 2018, https://doi.org/10.1016/j.petrol.2017.12.051.
G. Coskun, T. Kolcuoglu, T. Dogramacı, A. C. Turkmen, C. Celik, and H. S. Soyhan, “Analysis of a priority flow control valve with hydraulic system simulation model,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 39, pp. 1597-1605, 2017, https://doi.org/10.1007/s40430-016-0691-7.
J. Skowrońska, A. Kosucki, and Ł. Stawiński, “Overview of materials used for the basic elements of hydraulic actuators and sealing systems and their surfaces modification methods,” Materials, vol. 14, no. 6, p. 1422, 2021, https://doi.org/10.3390/ma14061422.
A. Wohlers, A. Backes, and D. Schönfeld, “An approach to optimize the design of hydraulic reservoirs,” 10th International Fluid Power Conference, vol. 1, pp. 609-618, 2016, https://tud.qucosa.de/landing-page/https%3A%2F%2Ftud.qucosa.de%2Fapi%2Fqucosa%253A29338%2Fmets%2F/?L=1.
I. Farida, R. Kheiriah, S. Sari and F. S. Irwansyah, “Application of the principle of hydraulic cranes on the conductivity tester,” Journal of Physics: Conference Series, vol. 1402, no. 5, p. 055072, 2019, https://doi.org/10.1088/1742-6596/1402/5/055072.
B. Xu, J. Shen, S. Liu, Q. Su & J. Zhang, “Research and development of electro-hydraulic control valves oriented to industry 4.0: a review,” Chinese Journal of Mechanical Engineering, vol. 33, no. 29, pp. 1-20, 2020, https://doi.org/10.1186/s10033-020-00446-2.
W. Schäfer et al., “Good urodynamic practices: uroflowmetry, filling cystometry, and pressure‐flow studies,” Neurourology and Urodynamics, vol. 21, no. 3, pp. 261-274, 2002, https://doi.org/10.1002/nau.10066.
F. Sciatti, P. Tamburrano, E. Distaso and R. AmiranteSciatti, “Digital hydraulic technology: applications, challenges, and future direction,” Journal of Physics: Conference Series, vol. 2648, p. 012053, 2023, https://doi.org/10.1088/1742-6596/2648/1/012053.
I. Yüksel, “Hydropower for sustainable water and energy development,” Renewable and Sustainable Energy Reviews, vol. 14, no. 1, pp. 462-469, 2010, https://doi.org/10.1016/j.rser.2009.07.025.
L. Darko, T. Vito, “Speed-controlled hydraulic drive systems for heavy machinery,” IMK-14-Istrazivanje i razvoj, vol. 27, no. 2, pp. 61-72, 2021, https://doi.org/10.5937/IMK2102061L.
S. Dadhich, U. Bodin, and U. Andersson, “Key challenges in automation of earth-moving machines,” Automation in construction, vol. 68, pp. 212-222, 2016, https://doi.org/10.1016/j.autcon.2016.05.009.
R. Mitrev, and D. Marinković, “Numerical study of the hydraulic excavator overturning stability during performing lifting operations,” Advances in Mechanical Engineering, vol. 11, no. 5, 2019, https://doi.org/10.1177/1687814019841779.
D. H. Autor, “Why are there still so many jobs? The history and future of workplace automation,” Journal of economic perspectives, vol. 29, no. 3, pp. 3-30, 2015, https://doi.org/10.1257/jep.29.3.3.
L. Pugi et al., “Fast modelling and identification of hydraulic brake plants for automotive applications,” International Journal of Fluid Power, vol. 21, no. 2, pp. 169-210, 2020, https://doi.org/10.13052/ijfp1439-9776.2122.
S. Ward, “Digital hydraulics in aircraft control surface actuation: Modelling and evaluation of digital hydraulic systems with focus on performance and energy efficiency,” Digitala Vetenskapliga Arkivet, 2017, https://www.diva-portal.org/smash/record.jsf?pid=diva2%3A1261126&dswid=4169.
G. J. Harloff, and B. M. Berkowitz, “HASA: Hypersonic aerospace sizing analysis for the preliminary design of aerospace vehicles,” NASA, 1988, https://ntrs.nasa.gov/api/citations/19890005736/downloads/19890005736.pdf.
I. Moir, and A. Seabridge, R. Langton, “Aircraft Systems: Mechanical, electrical, and avionics subsystems integration, 3rd Edition,” John Wiley & Sons, 2011, https://www.wiley.com/en-us/Aircraft+Systems%3A+Mechanical%2C+Electrical%2C+and+Avionics+Subsystems+Integration%2C+3rd+Edition-p-9781119965206.
R. I. Pelin, P. D. Bârsănescu, and I. Tiţa, “Hydraulic systems used for pitch control of wind turbines: a literature overview,” IOP Conference Series: Materials Science and Engineering, vol. 444, no. 4, p. 042013, 2018, https://doi.org/10.1088/1757-899X/444/4/042013.
M. A. Halim, M. M. Hossain, and M. J. Nahar, “Development of a Nonlinear Harvesting Mechanism from Wide Band Vibrations,” International Journal of Robotics and Control Systems, vol. 2, no. 3, pp. 467-476, 2022, https://doi.org/10.31763/ijrcs.v2i3.524.
DOI: https://doi.org/10.59247/csol.v2i3.127
Refbacks
- There are currently no refbacks.
Copyright (c) 2024 Sree Biddut Kumar