Design of Water Heater Temperature Control System using PID Control

Vatia Fahrunisa Rahmadini, Alfian Ma'arif, Nur Syuhadah Abu

Abstract


This research delves into advanced control methodologies by investigating the intricate applications of Proportional-Integral-Derivative (PID) control for achieving precise and dependable temperature regulation within electric water heaters. The study delves into various control strategies, namely Proportional, Proportional-Integral, and Proportional-Integral-Derivative methodologies, to realize the pinnacle of stable and exacting temperature control. The Proportional Controller, operating with a Kp value of 10, stands out with its relentless performance, characterized by minimal overshoot and an inconsequential steady-state error. Implementing the Proportional-Integral Controller, synergizing Kp at 10 and Ki at 5, elevates system stability while deftly curbing any hint of overshoot. The dynamic interplay between the Kp, Ki, and Kd parameters in the Proportional-Integral-Derivative (PID) Controller unveils an intricate dance of precision and control. Notably, configurations involving Kp 10, Ki 5, and Kd 2 emerge as beacons of rapid stabilization, heightened precision, and masterful overshoot management, exemplified by a rise time of 119.3543 seconds, settling time of 162.6116 seconds, overshoot of 1.0299%, peak time of 216 seconds, and a commendably low steady-state error of 0.31. This extensive exploration bears testament to its instrumental role in optimizing PID control strategies, ushering in augmented efficacy and pinpoint accuracy in water temperature regulation across an expansive spectrum of applications. As a result, these findings pave the way for the evolution of control methodologies that transcend theoretical confines and manifest within practical scenarios with profound impact.

Keywords


Heater, DS18B20, PID, Arduino

Full Text:

PDF

References


W. -T. Li, K. Thirugnanam, W. Tushar, C. Yuen, K. T. Chew and S. Tai, “Improving the Operation of Solar Water Heating Systems in Green Buildings via Optimized Control Strategies,” IEEE Transactions on Industrial Informatics, vol. 14, no. 4, pp. 1646-1655, 2018, https://doi.org/10.1109/TII.2018.2797018.

P. G. Terán and R. K. Plua, “Home Automation Application for the Monitoring and Control of an Electric Water Heater Using AWS Technology,” 2018 IEEE 38th Central America and Panama Convention (CONCAPAN XXXVIII), pp. 1-6, 2018, https://doi.org/10.1109/CONCAPAN.2018.8596474.

N. H. Wijaya, B. A. Lesmana, N. Shahu, I. Ahmad, and R. A. Atmoko, “Digital embedding system with heater and cooler,” Journal of Robotics and Control (JRC), vol. 2, no. 3, pp. 161–165, 2021, https://doi.org/10.18196/jrc.2371.

T. Abinaya, J. Ishwarya and M. Maheswari, “A Novel Methodology for Monitoring and Controlling of Water Quality in Aquaculture using Internet of Things (IoT),” 2019 International Conference on Computer Communication and Informatics (ICCCI), pp. 1-4, 2019, https://doi.org/10.1109/ICCCI.2019.8821988.

Y. Kim, N. Lee, B. Kim and K. Shin, “Realization of IoT Based Fish Farm Control Using Mobile App,” 2018 International Symposium on Computer, Consumer and Control (IS3C), pp. 189-192, 2018, https://doi.org/10.1109/IS3C.2018.00055.

T. I. Salim, T. Haiyunnisa and H. S. Alam, “Design and implementation of water quality monitoring for eel fish aquaculture,” 2016 International Symposium on Electronics and Smart Devices (ISESD), pp. 208-213, 2016, https://doi.org/10.1109/ISESD.2016.7886720.

A. Setiawan and A. Ma’arif, “Stirring System Design for Automatic Coffee Maker Using OMRON PLC and PID Control,” International Journal of Robotics and Control Systems, vol. 1, no. 3, pp. 390–401, 2021, https://doi.org/10.31763/ijrcs.v1i3.457.

G. Cosoli, P. Chiariotti, M. Martarelli, S. Foglia, M. Parrini and E. P. Tomasini, “Development of a Soft Sensor for Indirect Temperature Measurement in a Coffee Machine,” in IEEE Transactions on Instrumentation and Measurement, vol. 69, no. 5, pp. 2164-2171, 2020, https://doi.org/10.1109/TIM.2019.2922750.

M. D. Khairunnas, E. Ariyanto and S. Prabowo, “Design and Implementation of Smart Bath Water Heater Using Arduino,” 2018 6th International Conference on Information and Communication Technology (ICoICT), pp. 184-188, 2018, https://doi.org/10.1109/ICoICT.2018.8528772.

W. Ding, W. Chang, H. Gan and X. Xiong, “Multi-functional intelligent bathing machine for the elderly,” 2020 5th International Conference on Mechanical, Control and Computer Engineering (ICMCCE), pp. 966-969, 2020, https://doi.org/10.1109/ICMCCE51767.2020.00211.

A. K. Pasha, E. Mulyana, C. Hidayat, M. A. Ramdhani, O. T. Kurahman and M. Adhipradana, “System Design of Controlling and Monitoring on Aquaponic Based on Internet of Things,” 2018 4th International Conference on Wireless and Telematics (ICWT), pp. 1-5, 2018, https://doi.org/10.1109/ICWT.2018.8527802.

L. K. S. Tolentino et al., “Development of an IoT-based Aquaponics Monitoring and Correction System with Temperature-Controlled Greenhouse,” 2019 International SoC Design Conference (ISOCC), pp. 261-262, 2019, https://doi.org/10.1109/ISOCC47750.2019.9027722.

A. Latif, H. A. Widodo, R. A. Atmoko, T. N. Phong, and E. T. Helmy, “Temperature and humidity controlling system for baby incubator,” Journal of Robotics and Control (JRC), vol. 2, no. 3, pp. 190–193, 2021, https://doi.org/10.18196/jrc.2376.

G. M. Debele and X. Qian, “Automatic Room Temperature Control System Using Arduino UNO R3 and DHT11 Sensor,” 2020 17th International Computer Conference on Wavelet Active Media Technology and Information Processing (ICCWAMTIP), pp. 428-432, 2020, https://doi.org/10.1109/ICCWAMTIP51612.2020.9317307.

A. N. Fathoni, N. Hudallah, R. D. M. Putri, K. Khotimah, T. Rijanto and M. Ma’arif, “Design Automatic Dispenser for Blind People based on Arduino Mega using DS18B20 Temperature Sensor,” 2020 Third International Conference on Vocational Education and Electrical Engineering (ICVEE), pp. 1-5, 2020, https://doi.org/10.1109/ICVEE50212.2020.9243254.

D. Saputra, A. Ma’arif, H. Maghfiroh, P. Chotikunnan, and S. N. Rahmadhia, “Design and Application of PLC-based Speed Control for DC Motor Using PID with Identification System and MATLAB Tuner,” International Journal of Robotics and Control Systems, vol. 3, no. 2, pp. 233–244, 2023, https://doi.org/10.31763/ijrcs.v3i2.775.

R. Aisuwarya and Y. Hidayati, “Implementation of Ziegler-Nichols PID Tuning Method on Stabilizing Temperature of Hot-water Dispenser,” 2019 16th International Conference on Quality in Research (QIR): International Symposium on Electrical and Computer Engineering, pp. 1-5, 2019, https://doi.org/10.1109/QIR.2019.8898259.

M. K. Fadzly, S. N. Aqilah, Farizuan, T. Amarul, and A. R. Irfan, “Portable Water Cooler with Water Heater Using Thermoelectric and Arduino Uno and Powered Using Power Bank,” IOP Conference Series: Materials Science and Engineering, vol. 864, no. 1, p. 012216, 2020, https://doi.org/10.1088/1757-899X/864/1/012216.

A. Latif, A. Z. Arfianto, H. A. Widodo, R. Rahim, and E. T. Helmy, “Motor DC PID system regulator for mini conveyor drive based-on matlab,” Journal of Robotics and Control (JRC), vol. 1, no. 6, pp. 185–190, 2020, https://doi.org/10.18196/jrc.1636.

A. Ma’arif, Iswanto, N. M. Raharja, P. Aditya Rosyady, A. R. Cahya Baswara and A. Anggari Nuryono, “Control of DC Motor Using Proportional Integral Derivative (PID): Arduino Hardware Implementation,” 2020 2nd International Conference on Industrial Electrical and Electronics (ICIEE), pp. 74-78, 2020, https://doi.org/10.1109/ICIEE49813.2020.9277258.

P. Warrier and P. Shah, “Design of an Optimal Fractional Complex Order PID Controller for Buck Converter,” Journal of Robotics and Control (JRC), vol. 4, no. 3, pp. 243–262, 2023, https://doi.org/10.18196/jrc.v4i3.17446.




DOI: https://doi.org/10.59247/csol.v1i2.41

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Vatia Fahrunisa Rahmadini, Alfian Ma'arif

 
Control Systems and Optimization Letters
ISSN: 2985-6116
Website: https://ejournal.csol.or.id/index.php/csol
Email: alfian_maarif@ieee.org
Publisher: Peneliti Teknologi Teknik Indonesia
Address: Jl. Empu Sedah No. 12, Pringwulung, Condongcatur, Kec. Depok, Kabupaten Sleman, Daerah Istimewa Yogyakarta 55281, Indonesia